Why EPDM Is at the Top of the List of Roof Repair Materials

Posted on July 19, 2018 by Brian McCallister

Picking the right roof repair materials will make or break your project – literally.

If you don’t make the right choice with this decision, that roof is not going to get repaired and you’ll be back up there in no time after further damage has been done.

While there are countless roof repair materials out there to choose from, most would agree that EPDM is at the top of that list.

Green Products Are Better

The first reason EPDM is so popular is because green roof repair materials are better. Hopefully, we can agree that being environmentally friendly is a good idea. Unfortunately, they often cost a lot more.

With EPDM, you’re using recycled materials, which means they’re going to cost a lot less to produce. In turn, you’re paying less for them. Fortunately, you don’t lose any tensile strength by going this route.

EPDM Will Cut Utility Costs

EPDM is great for roofing because it seals in the house. This still applies if you’re looking for roof repair materials, though.

This material is so strong that you’ll see the results in your utility bill. The AC you pay so much for won’t leak out during those hot summer months. Likewise, when you’re spending money to keep your house warm, that hot air doesn’t rise up and out of your roof where there’s EPDM.

Waterproof Protection

While this should go without saying when it comes to roof repair materials, it’s still worth pointing out that this recycled material is waterproof. That should come as no surprise given how strong it is, but water will be kept away from your house so leaks don’t occur.

Long-Lasting Repairs

Nothing frustrates a homeowner more than repairing a roof only to have it suffer from further damage within a year or so.

Of all the options out there, you’ll have a hard time finding any that can outperform EPDM in this regard.

Studies have been done where EPDM applications have been checked after 30 years only to find that it is in just as good shape as it was the day it was first applied.

Keep in mind, too, that EPDM can be used in any climate. Its strength doesn’t break down from extreme heat or cold, so no matter where your home is located, this material is fantastic.

You Don’t Need to Spend a Fortune

Whether we’re talking about a single leak below a shingle or severe damage that was done by a massive storm, you don’t need to spend large sums of money on EPDM.

As we mentioned at the beginning, it’s largely made from recycled materials. On top of that, it’s so easy to apply that even if you pay someone else to do it, your costs will be minimal (but your results won’t).

EPDM will continue to grow in popularity for all of the above reasons. If you have roof repairs that need to be done, then, it’s easy to recommend this amazing material for the job – no matter how big or small it is.

How to Choose the Right Elastomeric Roof Coatings

Posted on June 21, 2018 by Brian McCallister

Many people today are choosing to have elastomeric roof coatings on their buildings because of the many benefits they can offer. They tend to be highly durable, and they can help to reduce the risk of leaks substantially.

However, there are a range of options on the market that promise a lot and end up not delivering. You need to make sure that you are choosing a high-quality product that will provide you with the true protection you need and deserve. The following are some of the important factors that you will want to consider when you are choosing elastomeric roof coatings.

Flexibility

One of the first things to consider will be the flexibility of the product. If you live in an area that has temperature extremes, you need to be sure that the coating is going to be capable of standing up to those changes without suffering damage. For example, if you live in an area where it snows and freezes in the winter, you need a product that can handle those temperatures. The same is true if you live in an area where there is a substantial amount of sunlight, and therefore heat, which strikes the roof.

Liquid Rubber is a great option because it can handle temperatures from -40 degrees F to 300 degrees F with no problem. The coating needs to be elastic enough that it can move and shift as the building materials expand and contract with the changing temperatures. If you don’t have a material that can do this, you are going to end up with cracks, which means it will be easy for leaks to occur.

Durability

How durable is the elastomeric roof coating you are considering? If you have a coating that is of poor quality, it might only last for a few years before it starts to crack or become chalky, neither of which you want. Instead, you need to choose a material that can last for decades. Again, Liquid Rubber is a great choice. This coating has been proven to last for many years without any issues.

Puncture Resistance

While you might not imagine there is anything that is going to puncture your roof, you might be in for a surprise. The wind can blow branches and all manner of other debris onto the roof. If you have a low-quality coating, it means that there is a chance that it could damage the roof. Having a quality material that is resistant to punctures will help to reduce this risk. Of course, you are still going to want to inspect the roof a couple of times a year to make sure there are no issues and that you remove any debris that might have accumulated there.

Ease of Application

Of course, one of the most important things that you will need to consider when it comes to your roof is the installation or application process. When you choose a liquid EPDM coating, you can take care of the application on your own, as it goes on much like paint. Before you choose a product, you will want to consider whether you can apply it on your own or if you are going to need to hire a professional.

As long as you take your time and understand the products that you are considering, you will be able to find the perfect elastomeric roof coatings for your building. When you spend a bit of time researching and understanding the products out there, it will make it far easier to make choices that you are happy with and that truly protects.

3 Big Problems Liquid Rubber Roofing Combats

Posted on February 15, 2018 by Brian McCallister

If your roof isn’t in the best shape, there’s a good chance that it is being damaged by one of three big problems that plague all roof tops: the sun, water, and temperature changes. These issues can cause roof tops to become brittle, to crack, or to break entirely. But liquid rubber roofing combats all three. Here’s how:

Liquid Rubber Roofing vs. The Sun

The sun’s rays are a big problem for traditional roofing material. Any roofing material that uses tar and asphalt, especially, is susceptible to UV ray damage. This causes roofing material to become very brittle, and once it begins to break, there are gaps in your roof that cause big problems when inclement weather rolls around. Liquid rubber roofing is UV resistant, which means it actually reflects the sun’s rays, rather than absorbing them. Not only does this protect the roof, it also makes the interior of the building cooler, which means you spend less on your utility bills.

Water Isn’t a Problem, Either

The next big issue for most roofing materials is water. If there is even the tiniest crack in a roof, perhaps from all the sun damage, water can get inside and cause bigger problems. It can start to damage the entire structure of the building, the electrical elements, and anything that is inside. And if it is cold out, water can freeze in the cracks, which causes them to become larger. Liquid rubber is waterproof, so it completely repels water that falls from the sky. And by protecting against sun damage, it prevents the tiny cracks that lead to water damage in the first place.

Temperature Changes Are No Worry

Finally, many roofing materials can be damaged over time by big fluctuations in the temperature outside. When the air changes from hot to cold, the roof (like all building materials) will expand and contract. The more this happens, the harder it is for the roofing material to keep up with the changes. Eventually, this natural phenomenon leads to cracks in the roof. Liquid rubber roofing is a flexible material, meaning it can expand and contract without cracking and breaking, even in extreme temperature changes. This also prevents the roofing material from cracking as the building settles, because the roof is able to “move” with the building.

Give Your Roof the Protection It Needs

Instead of replacing your roof with a pricey overhaul to keep it from cracking under the elements, why not give it some protection instead? Liquid rubber roofing can cover most roofing materials, and provide a flexible, waterproof, UV-blocking coating that keeps your building better covered. You won’t have to worry about the three biggest issues that most roofing materials face, and you won’t have to pay for an expensive roof replacement any time soon. Plus, you’ll see lots of other benefits, like lower utility bills, thanks to the UV-blocking power of this material.

Consider using liquid rubber for your roof to avoid structural damage for years into the future.

How to Choose Between EPDM Rubber Coatings

Posted on January 16, 2018 by Brian McCallister

You’ve heard about rubber roof coatings and are interested in obtaining the benefits offered for your business. However, one look at the industry shows you that there are lots of different brands out there. How do you choose between EPDM rubber coatings for your company’s roof? What are the most important elements to consider, and how do the various options out there stack up?

When Is It Waterproof?

Perhaps one of the most important considerations when comparing EPDM rubber coatings is to determine when the coating is waterproof. Many types of rubber roofing on the market need time to dry before they are waterproof or even water resistant. That means if it were to rain while you were in the middle of applying them, they would be compromised, and you’d need to remove the damaged coating and reapply. With Liquid Rubber, that’s not the case. It’s waterproof from the minute you apply it.

What Substrates Does It Work With?

You need a material on which to apply EPDM rubber coatings. This is called a substrate. The problem is that some coatings will only adhere to certain types of materials. If your roofing substrate is something else, you’re out of luck. The good news is that Liquid Rubber can bond with virtually any substrate you might have, ensuring the smoothest possible process and saving you time and hassle.

What about the Lifespan?

How long is the lifespan of the various EPDM rubber coatings you’re considering? How soon will you need to reapply another coating? Most products on the market have a relatively short lifespan, but Liquid Rubber can last between 15 and 17 years with just a single coating. That applies to seams, as well as all other parts of your roof. You can increase the durability by increasing the number of coatings, as well, which brings us to another consideration – mil rate, or thickness.

How Thick Can You Go?

The thicker EPDM rubber coatings are, the more durable they will be and the more impact resistant they are. However, most products are limited in terms of mil rate. Liquid Roof can be applied up to six times thicker than competing products, and can be applied up to 20 mil in thickness.

Ability to Withstand Expansion and Contraction

How well do the EPDM rubber coatings you’re considering handle temperature related expansion and contraction? When the mercury soars, the material will need to expand. When it gets cold, it will contract. That can create significant stress and deterioration with some products. However, Liquid Rubber can handle expansion and contraction better than any other product. In fact, it can handle temperature ranges from -40 to 300 degrees F.

If you are considering EPDM rubber coatings for your business, then Liquid Rubber definitely deserves a spot at the top of your list of options. Durable, affordable and capable of handling a tremendous range of temperature fluctuations, this rubber roof coating delivers the peace of mind and performance you need.

What Are the Benefits Offered by EPDM Roofing?

Posted on December 19, 2017 by Brian McCallister

You have no shortage of roofing options today. Conventional asphalt shingles are the most common, but you might also choose sheet metal, natural stone, or any number of other choices. However, EPDM roofing might be the better choice for your home. Why is that? What benefits does EPDM roofing offer over other types on the market?

1. Long Lasting

One of the most important reasons to choose EPDM roofing is that it offers a very long lifespan. Most applications last a minimum of 17 years, but a little TLC can ensure that your roof will last for much, much longer. And there’s very little maintenance required during that time. Regular cleaning is really all that you’ll need to do.

2. Impact Resistant

Most types of roofing are subject to impact damage. Natural stone like slate can crack and chip when a limb or other debris impacts it. Metal can be easily dented. Asphalt shingles are easily punctured. EPDM roofing is impact resistant, giving your home more defense against debris from storms, falling limbs and other threats. Even if something somehow manages to puncture the coating, repairing the damage is as simple as applying another layer of liquid EPDM to the area, which can be accomplished in mere minutes.

3. Waterproof

Most forms of roofing are waterproof, but only to an extent. A puncture in a shingle generally means a water leak into the substructure of the roof. A leak along the edge of slate shingles means water penetration into your home. A damaged seam or incorrectly installed/sealed flashing on metal roofing means water entering your home. EPDM roofing is completely waterproof, though. What’s more, it is waterproof from the minute it is applied to the roof, providing you with protection against moisture instantly.

4. No Seams

Many types of roofing have seams – anytime you must join two pieces of material, there is a seam involved. The problem is that seams tend to leak over time. They’re the weakest point in your roofing system. With EPDM roofing, you don’t have to worry about seams. This liquid roofing material is rolled or sprayed on, and is completely seamless. That means less worry about degradation, no need to check your seams annually for damage and more peace of mind about the quality and durability of your roof in general.

5. Temperature Stable

EPDM roofing is capable of handling temperatures that range from 40 degrees below 0 to 300 degrees F. That means you never need to worry that your roof will be damaged by extreme temperatures.

EPDM roofing offers a number of significant benefits. It is cost effective, simple to apply, and long lasting. Its durability is second to none in the industry, and the fact that it is impact resistant makes it an ideal solution for residential roofing in areas prone to tornadoes, hurricanes and other strong storms where wind-blown debris might damage the roof of a home. It is also perfectly suited for commercial roofs, and can be used to prevent damage from ponding water on flat roofs.

5 Reasons You Should Consider Elastomeric Roof Coatings for Your Business

Posted on November 21, 2017 by Brian McCallister

When it comes to roofing for commercial operations, there are quite a few options on the market. One of the most common is concrete, although it must be sealed against moisture. Others include sheet metal and asphalt shingles. However, elastomeric roof coatings could be the most beneficial choice. What are the benefits offered, and why should you consider this type of roofing for your business?

Alleviate Damage from Ponding

If your business has a flat roof, then ponding water will be a concern. Simply put, there is no way to prevent water from ponding on a flat roof, at least to some extent. The issue is that as water stands, it slowly seeps into the roofing material below it, and it causes damage to the underlying substructure of the roof. With elastomeric roof coatings, ponding water is not a threat. This material is completely waterproof, ensuring that no matter how long water might stand on your roof, it will not penetrate to the substructure.

Easily Applied

With most roofing materials, you must pay to have it installed by a professional team. With elastomeric roof coatings, that is not the case. In fact, you can save yourself a great deal of money by applying this coating on your own. Of course, you can certainly choose professional installation, but there is really no need for it. These coatings can be applied very easily using just a roller and paint brush. However, if your roof is more than 5,000 square feet, it’s recommended that you use a sprayer to speed up the job.

Waterproof Instantly

Unlike many other types of roofing, particularly rubber roofing compounds, elastomeric roof coatings are waterproof from the instant they are applied. That means if it starts raining while the coating is being applied, it will cause no damage, and there will be no need to reapply EPDM rubber to any area.

Cost Effective

Elastomeric roof coatings are among the most cost-effective solutions available for business owners. A single coating can provide your business with protection from the elements for up to 17 years. What’s more, multiple coatings can be applied to create a thicker layer of protection.

Address Leak-Prone Areas

Businesses must deal with the potential for leaks in many areas where residential roofs do not. For instance, HVAC equipment installed on the roof has the potential to create water leaks. Using elastomeric coatings to protect against water intrusion around air conditioners and the like ensures protection for the entire business. A single coating is more than enough to prevent water from seeping between the mounting points of equipment and the roof.

As you can see, elastomeric roof coatings are highly beneficial for business owners, property owners and others. This material offers significant durability, is easy to apply, and can hold up to years of weathering without any ill effects. If you’re struggling with roof maintenance or water leaks, consider EPDM Liquid Rubber roofing.

Many Are Choosing to Use Elastomeric Roof Coatings

Posted on October 17, 2017 by Brian McCallister

An elastomeric roof coating could be the right choice for anyone who needs to take care of their roof and make sure that it has the proper protection against leaks and other issues. These coatings can provide you with an effective and affordable option for fixing a leaky roof you might have now, as well as to make sure there are no leaks in the future. These types of coatings have a range of benefits that help to make them such a stellar option. Let’s look at some of the reasons many are choosing to work with elastomeric roof coatings.

Great All Year Round

One of the nice things about the product is that it works so well in different temperatures. Whether it is the dead of winter or at the hottest point of summer, the elastomeric roof coatings can expand and contract to provide protection for your roof. You can think of it like a skin for your roof.

Works With Many Types of Materials

Another one of the nice features of elastomeric roof coatings is that they are quite easy to use with many different types of roofs. They work well with wood, singly ply roofing, built up roofing, concrete, metal roofs, and more. As long as the roof is flat, you should not have a problem when it comes to using this type of coating.

Very Durable

In addition to being able to withstand extreme temperature differences, you will find that the elastomeric roof coatings are durable in other ways. They can hold up for many years without needing another coat. In fact, many times they will not need to have any major work done for around 20 years.

Easy to Apply

Another reason people are utilizing elastomeric roof coatings is because they are easy to apply. You could have someone take care of the application for you if you wish, or you could take care of the project on your own. Whether you do it yourself or not will often depend on the size of the roof and the amount of time you need to complete the task.

If you are going to do it on your own, you will first need to clean the roof properly. You need to remove all the debris and dirt from the roof so the coating can adhere properly. Once it is clear, you can mix the coating in its container and then apply it. You can use a spray tool, a roller, and brushes for the application. Those who have extremely larger roofs to cover might want to choose one of the brushes, as it can make the job easier.

It will take just a single coat for the roof, and then you will have the protection you need from leaks, as well as from UV damage. Check the roof once in a while after you have applied the coating, just to be sure that no fallen debris, such as a branch, has caused any damage. The coating tends to be hearty, so this should not be a problem.

Why Use Liquid EPDM Rubber?

Posted on September 18, 2017 by Brian McCallister

EPDM liquid rubber is one of the most used materials for individuals looking to seal the roof of their commercial business or home. In fact, this type of product is making the conventional elastomeric nearly obsolete.

Elastomeric systems often require a primer, a base coat, and then a final coat before they are ready to go. This adds to the weight of the roof and really is not worth it when you consider that a liquid rubber roof lasts nearly four times longer. This is because of the chemical structure of the liquid rubber.

There are a number of reasons to choose liquid EPDM rubber, and a few are noted just below:

Why Liquid EPDM Rubber?

This roof coating system does not require a primer and only requires a single coat of the liquid rubber. This saves time and energy, plus it means you have to buy less of the product.
This product waterproofs as soon as it is applied. Even if you just got it down and have left the roof, if a rain shower comes through, you have nothing to worry about. It will not allow leaks and you will not have to worry about putting on a new coat.
Liquid rubber is traditionally made in the United States and is subject to all rules and regulations, so you can be sure that it is safe to use for anyone.
Through what is called the “curing” process, the rubber can conform to any shape. When it has done so, it is a perfect, seamless surface. You don’t have to worry about seams and inspecting them off and on. After one coat of liquid rubber, your membrane will be complete and may last as many as 15 years without any maintenance.
This type of coating is environmentally safe, which cannot be said for many other roof coatings.
Liquid rubber roofing material is resistant to ultra violet and ozone rays, making it safer to use.
The product is puncture resistant and is virtually odorless once the curing process is complete.
Pooling water is not competition for this type of material as it can withstand standing water year-round. This is something unique to the product.

Do It Yourself Aspect

Another thing that is important to understand when it comes to this product is that it is easy to apply on your own. There’s no need to have an expert come out for installation and very few tools are needed to apply the liquid rubber. There are tutorials online that can walk you through the entire process if you are not sure where to start.

People are continually switching from traditional roofing sealants to liquid rubber because of the many great benefits that they see in it. Not only is it easy to use, it’s affordable when compared to other options. It’s safe, for you and your entire family. It ensures you have no leaks and your home or business stays in pristine condition. There’s really no reason not to try it, so think about giving it a shot the next time your roof springs a leak!

Use EPDM Rubber for Roof Repair and Preventative Measures

Posted on August 10, 2017 by Brian McCallister

When was the last time you thought about your roof? Whether you own a business or home, you probably only think about the roof after something has gone wrong with it. Maybe you have noticed that you have a leak. Maybe you are simply worried about the potential for a leak since you store so many goods for your business below that roof. Whether you know you have problems, or whether you simply want to head off potential issues in the future, using EPDM rubber for roof repair and to prevent problems can help.

It is important to make sure that you have a proper, safe roof whether it is for your home or business. Let’s discuss some of the things that could point to signs of trouble and how EPDM rubber roof repair could help.

Leaks and Other Issues with Water

Water on the roof can be one of the biggest problems and threats that you will face. You might find that you have ponding water, which means that there is essentially a puddle that is sitting on top of your roof. This could be an indication of damage to the roof, and it could mean you have a leak, or will have one soon. Ponding water could also be an indicator that you will have other trouble with your roof if you do not take care of it quickly. You wouldn’t want that entire area of the roof to cave in, would you?

Of course, the water does not have to be ponding in order to be a problem. You could still have some cracks or holes in the roof that could be causing problems for you. They can allow for leaks, and this can cause severe damage to the roof and everything that is below. You do not want to deal with this problem either, so utilizing EPDM rubber roof repair now could be helpful.

Once you apply a coat – just a single coat – of the material to your roof, it keeps it safe from water. It provides a barrier that will help to ensure the water does not leak into your residence or your business. In addition, it can prove to be quite helpful for those who are having issues with UV damage to their roof. Again, it acts as a barrier that protects the roof from damage.

Keep an Eye on Your Roof

You always want to make sure your roof is in good condition, even after you have used the EPDM rubber for roof repair. This way, you can make sure that nothing, such as falling tree branches and other debris, is causing issues. The roof is one of the most important parts of the structure, so you should always do your best to care for it the right way. This coating could be just what you need, and one of the other benefits is that you can apply it on your own and without the need of a professional if you wish.

How EPDM Makes Roof Repair Easier

Posted on July 13, 2017 by Brian McCallister

Do you need a roof repair job done?

If so, make sure you or the team you hire uses EPDM. As we’re about to show you, it comes with a number of benefits.

Works Well in All Climates

Depending on how far along you are in your roof repair journey, you may have realized that a big factor you need to consider before choosing any materials is that they’ll need to hold up to the weather.

The great thing about EPDM is that it can take on any weather conditions whatsoever. This amazing material is popular down south where the sun pounds on it for the better part of a day and in the north where winter temperatures are merciless 24/7.

Does More Than Protect Your Roof

Obviously, your main concern when carrying out a roof repair is that the job is successful. This means that there won’t be any leaks or other damage done to the home below.

When you use EPDM, though, you get the added benefit of the inside of the house becoming more insulated. That air conditioning you pay so much for stays in place instead of escaping. Likewise, when you’re paying to keep your house nice and warm, that money isn’t being wasted.

Do Your Roof Repair Once and Never Worry About It Again

Every roofing material has its limits. It’s just that with EPDM, those limits are so far into the extremes (in terms of temperature and damage), that you really never have to worry about it occurring.

In other words, once you do a roof repair with EPDM, that’s it. You’re not going to have to come back next season because of strong winds, hot sun, cold winters, etc.

This isn’t some sales pitch. There’s proof. When the EPDM Roofing Association (ERA) did an inspection of homes with EPDM roofs for more than 30 years, they found that these powerful membranes still had high levels of textile strength. They were actually just like new.

Easy Installation

With all these benefits, you might think that using EPDM to handle a repair could mean you were in for one long project.

While every repair job is going to be a bit different, EPDM has a reputation for being easy to apply and quick to set. If you’re doing it yourself, you’ll need some equipment, but it won’t take long to complete.

Likewise, if you’d rather hire a professional, the good news is that the entire repair shouldn’t take more than a day. You’ll have your roof back and be able to return to your normal routine in no time.

An Extremely Affordable Option

Finally, you might be worried about the cost of EPDM seeing as how it provides so many advantages.

Again, EPDM will surprise you. It’s extremely easy to manufacture, so it doesn’t cost a lot. Even if you pay someone else to do the repairs, the price of the materials will put a smile on your face.

Repairing a roof right the first time is important. While there are many ways to do it, the evidence is clear: EPDM is the best material for the job.