How to Restore Your Roof with a Coating

No building is complete without a quality roof making it a proper shelter. So if your building’s roof is currently suffering from issues that compromise its reliability, you should move quickly to address them. Roof restoration may seem like a challenging task, but it’s actually quite easy so long as you have a quality coating on your side.

Considerations before Beginning

Before you get started, there are a few things you need to consider. First, roof coatings aren’t a good idea for roofs made of gravel or foam or those above cathedral ceilings. You also want to avoid using them on roofs that are experiencing issues with puddles forming. Any other high-risk issues should involve the opinion of a contractor before starting.

In terms of weather, it’s ideal to apply roof coatings on a nice cool day. Working on a roof can be a hot endeavor when the sun is high in the sky, which is why it’s best to install your coating during the spring or fall. At the very least, if you have to do it in the summer, begin in the early morning.

Prepare the Roof

While roof coatings are easy to install, they won’t bond with the surface of your roof if you don’t first prepare it. This means cleaning the roof thoroughly. Any speck of debris left will cause issues.

Be sure to inspect the roof as well for any areas that may need repairs. While you may already know about one repair—perhaps the one that prompted you to begin the coating process—now’s a good time to check for other issues. Plasters, caulk, sealants, and more are a good way to handle cracks and leaks, but this is also why you should inspect your roof early on. Those materials will need to set and dry before you can put any roof coating materials over them.

Before applying the coating, make sure the entire roof is dry, especially as you should have been using water and other chemicals to clean it off.

Apply Your Coating

How exactly you apply your product will depend on the roof coating manufacturer you went with. Be sure to read the directions. However, most roof coatings can be applied with a simple paint roller attached to an extension pole to make things easy. Pour the coating out into a dipping pail and then apply a top coat first. You want about 100 square feet of roof covered for each gallon, so pace yourself accordingly (again, check your brand’s instructions to confirm).

After that, apply two more coats. Make sure you’re not over-rolling the material either, as this will make it too thin to be effective. You want nice thick coats and the 100 square foot/gallon pace should achieve that.

Throughout the year, wash your roof regularly if it’s important for you to keep the reflective property it provides. Otherwise, just be sure to monitor it for any maintenance it may need.

Roof coatings are just that easy to apply. Making them an even more attractive option is how cheap and effective they are too.

Leave a Reply

Your email address will not be published. Required fields are marked *