An Overview Of The Roofing Services Provided By EPDMCoatings.Com

EPDM Coatings is a reputable company that delivers state-of-the-art materials designed for roof leaks repair. The Liquid Roof and the Liquid Rubber are by far the most popular choices in terms of leak repair – while the first ones is designed exclusively for trailers, motor homes and RVs, the latter is designed for residential and commercial roofs. Besides, both types of material can be easily applies with the help of a roller, a squeegee or an airless spray – whichever suits you best! Here you will find a deeper insight into these two roofing products and their benefits.

An Overview Of Liquid Roof

Liquid EPDM has a series of notable benefits over the classic roofing materials, and one of them is the fact that it is liquid, therefore it can easily reach even the smallest cracks. With an average life span of 8 years and a temperature endurance range between -40 degrees Fahrenheit and +300 degrees F, the Liquid EPDM is certainly a great choice nowadays. This material is waterproof and it delivers outstanding results throughout all the four seasons. If you have a motorhome and you are concerned about roof leaks or damage, then the Liquid Roof is exactly what you need – versatile, easy to apply, durable and reliable.

Liquid Rubber – What Makes It So Special?

The Liquid Rubber is another great choice in terms of roofing, especially since it involves no primers whatsoever. Also, given the fact that this involves a one-coat application, the Liquid Rubber is a considerably more cost-effective alternative to traditional roofing materials (not to mention that it adds less pressure and weight to your roof, as opposed to multi-coating roofing systems). The Liquid Rubber is extremely thick and it creates a protective shield that can prolong the life of your roof.

Another important aspect is that the Liquid EPDM Rubber can be used on a variety of material applications, from bricks and concrete to wood of all kinds.

The Bottom Line

In conclusion, these liquid roofing materials are very versatile and they can be used on almost any type of material, except asphalt-based substrates. There is no better way to prevent the chalking and ageing of your roof than with a thick coating of Liquid EPM Roof or Rubber! These materials are solvent-based and they will quickly harden and form a protective shell that will ensure the efficacy and integrity of your roof in the long run. The EPDM roofing materials are created to withstand the test of time and weather.

EPDM Rubber Roofing Characteristics in the Installation Process

People can install EPDM rubber roofing materials in many forms. People can find some roofing items that come in the form of thin roofing rolls that can be applied and sealed onto any surface. Others can find rubber roofing items that come in a liquid form and can be poured into any crevice or onto any hard surface. The choices that people have to go along with when finding such great roofing materials can vary but there are a few characteristics that will certainly have to be checked during the installation process.

First, the installation process must involve something that is as thick as it can be. The body of liquid EPDM makes it easy to solidify after it is poured into a space. It can be about twenty to thirty millimeters thick in many cases. This should not add all that much weight as will be discussed in just a bit.

Some EPDM rolls tend to be a little thicker than liquid forms. They are usually forty or fifty millimeters thick. This is a little deeper but it is still small enough to where the process of installing the material should not be all that hard to work with. The roll itself should be thin enough to where it will create a cover without making things look all that bulky over the body of the surface.

The weight that is added to the roof in the installation process should be extremely minimal. An average coating that takes up about one or two hundred square feet of space should weight thirty to sixty pounds on average. This weight will be distributed evenly around the entire body of the roof. In other words, it will not be likely to create more pressure than necessary.

The body of the roof will also attach itself to the right space as carefully as possible. The body will attach to a section by linking up to the underbody of the roof and can even be affixed with nails as necessary. However, the adhesive nature of EPDM makes it so there might not be a need to use nails to affix to space carefully. In addition, the EPDM rubber roofing can be applied with a few weights over the surface if desired but it is not always required.

Finally, the roofing surface will only require one coating regardless of the physical properties of the EPDM being used here. This is because a roof that is treated with two coats might develop wrinkling from the added solvent that comes onto the surface. These wrinkles will disappear once the solvent evaporates but it will take quite a while for the solvent to actually evaporate. Therefore, it is better for a home to be treated with an EPDM surface that uses only one layer of coverage over its body.

EPDM rubber roofing materials have to be installed appropriately if they’re to be as nice as possible. It must be used well to create a strong surface provided that the right characteristics are being added to the space as needed.